Table of Contents
Advertisement
INTRODUCTION
The M-60 Xd is a high-resolution monitoring system designed for mixing, editing and mastering. The
M-60 Xd employs DEQX calibration, a proprietary dsp correction system that corrects frequency and
time domain response in real time. In addition, the system offers almost "brick wall" digital crossovers
(up to 300dB per octave) and does all processing with latency less than 10ms making it useful for film
production as well as music. The benefit to the audio professional is a wider sweet spot, a higher out-
put system and dead-on accurate reproduction.
The system includes a pair of monitors and a dedicated, outboard processor amplifier. The uniquely
shaped cabinet is ideally designed for near-field listening. The wide baffle around the tweeter
promotes even power response, and the narrow baffle surrounding the woofer reduces midrange
reflections and reduces cabinet resonance. The lack of parallel surfaces on the cabinet minimizes the
formation of internal standing waves. The drivers employed in the M60 monitors are designed for
power handling and extremely low non-linear distortion.
The XdA amplifier/processor houses the DEQX DSP processor, switching power supply and four
150W, class D amplifiers. The system is bi-amplified, each amplifier is dedicated to a single driver in
the system.
The M-60Xd can be used as a stand alone monitor pair or be mated with the NHT S-80 subwoofer for
a full range system. The M-60 Xd offers accuracy previously unknown in the loudspeaker universe.
The system has a frequency response of +/- 0.5dB from 55Hz - 20kHz, with distortion less than 0.3%
above 100Hz at 90dB SPL.
The M-60 Xd is shipped with factory preset filters. The system is as future-proof as we can make it.
As we develop new filters and other uses for the DEQX DSP engine, you can upgrade your system
via the USB2.0 port found on the back of the XdA.
Advertisement
Table of Contents
