Hisense RS-13DJ1SCA/UGE-003 Service Manual page 26

22
6.3.2.1 Compressor protector test
Use a multi-meter to test the resistance between the two end as the picture show :
If there show 000 or almost 0 then it is OK.
If there is no response then it is broken.
6.3.2.1 Compressor PTC starter test
Use a multi-meter to test the resistance between the two end as the pic show :
If the meter displays is between 15 ± 5 Ω then it is OK.
If themeter displays 000 or noresponse, then it is broken.