Advertisement
8.4 System Status Indicators
(Front Panel)
Located on the right hand side of the front panel
are two LEDs. They are used to indicate the
functional status of the X1 Crossover.
P - Power LED (green) - indicates the X1 is on
and in a ready condition.
S - Standby LED (amber) - indicates the X1
crossover is in "standby" mode.
"Boomy"
Too Much
Mid / Upper
Bass
Adjust
Subwoofer
Phase
0-90
(Continuously
Add)
Lower
Low Pass
X-Over
Frequency
Lower
Subwoofer
Volume
Listen
Fine Tuning Flow Chart
Lacks
Mid / Upper Bass:
Lean But With
Weight
Adjust
Subwoofer
Phase
0-90
(Continuously
Add)
If this makes
it worse,
try
Low-Pass
If the sound
improves
Subwoofer
Adjust
Subwoofer
Volume
Subwoofer
Listen
8.5 Fine Tuning Chart
The chart below was developed to assist you in
the further fine tuning of your subwoofer or
tower system. Should you be unable to achieve
satisfactory performance from your Evolution
subwoofer system using the fine-tuning chart,
contact your authorized NHT dealer or call our
Customer Hotline at 1-800-NHT-9993 (648-
9993).
Lacks
Bass
Weight
Adjust
Subwoofer
Phase
Switch
0-180
Increase
Boundary
Raise
Setting
Move
Subwoofer
Adjust
Closer to
Volume
Listen
Adjust
Phase
Listen
Excessive
Low
Low
Bass
Weight
Decrease
Boundary
EQ
Move
Subwoofer
Farther
From Wall
EQ
Listen
Wall
Advertisement
