Advertisement
nect one of the Sub outputs on the X1 to the
input on the A-1. Set the mode switch on the X1
to Mono.
Note: If you are using two A1 amplifiers for
stereo bass, as with the T6 tower system, set
the mode switch on the X1 to Stereo and use the
remaining Sub output on the X1 and connect to
the input on the second A1 . Make sure the left
and right channels are wired correctly.
Method 1 - Recommended Surround Settings
Set your Left and Right front speakers to "large"
in your AV receiver. Set all other speakers that
are not capable of producing low bass frequen-
cies to "small". The "large" setting will send a full
range signal to the X1. The Hi Pass and Lo
Pass controls on the X1 crossover will then be
used to set the crossover frequencies for the
front L and R monitors and the subwoofer (see
section 7).
The Subwoofer(s) receive bass
information from the front Left and Right chan-
nels and the Subwoofer/LFE output (see section
8.3).
AV Suround Processor
Pre Out
L
R
LFE/
Subwoofer
Method 2
Use this connection method if you have a sepa-
rate Surround Processor and Amplifier(s).
-
Connect the front Left and Right pre-amp
outputs from your Surround Processor to the
Left and Right inputs on the X1.
-
Connect the Left and Right Hi Pass out-
puts on the X1 to inputs of the amplifier that is
driving the front Left and front Right speakers.
-
Using a single cable, connect the
Subwoofer/LFE output from the Surround
Processor to the LFE input on the X1.
Method 2 - Recommended Surround Settings
Set your Left and Right front speakers to "large"
on your AV receiver. Set all other speakers that
are not capable of producing low bass frequen-
cies to "small". The "large" setting will send a full
range signal to the X1. You will then use the Hi
Pass and Lo Pass controls on the X1 to set the
crossover points for the front monitors and the
subwoofer (see section 7).
receives bass information from the front Left and
Right channels and the Subwoofer/LFE output
(see section 8.3).
To Power amp
The Subwoofer
Method 2
X1
Advertisement
