Table of Contents
Advertisement
4. Connect the Ethernet cable to the LAN port on the back of the con-
troller's main unit.
5. Connect the 12V
power suppled through the outdoor unit to the
power terminal located at the back of the controller's main unit.
Outdoor unit connector
Outdoor
Outdoor
Indoor
Indoor
unit B
unit A
unit B
unit A
18 Cloud Gateway
Central
Central
Dry 1 Dry 2 GND
12 V
control B
control A
6. Match the groove of the product to the hook of the wall installation
plate installed on the wall.
7. Lower the product to lock the hook. Fix the installation plate and
product through the controller fixing screws after locking.
8. Turn on the power.
Installation Manual 19
Advertisement
Table of Contents
