26.
Remove the dummy connector covers from the SAS/SATA connectors on rear of the 2.5-inch HDD
cage.
27.
Connect the power cable, SAS/SATA cables, and SGPIO cable to the rear of the 2.5-inch HDD
cage.
– SAS/SATA cable
Connect the SAS/SATA cable from the farther connector on rear of the 2.5-inch HDD cage with
the connector on the optional RAID controller. Connect another SAS/SATA cable from the
nearer connector with the connector on the other optional RAID controller.
– SGPIO cable
Connect the SGPIO cable with SGPIO B connector on mother board.
SAS/SATA connectors
28.
Install the components having been removed.
Removal
Remove the HDD cage in the reverse procedure of the installation.
SGPIO connector
Power connectors
13