Table of Contents
Advertisement
19.
Connect the power cable, SAS/SATA cables, and SGPIO cable to the rear of the 2.5-inch HDD cage,
as shown in the figure below.
Internal RAID Controller
SAS/SATA connectors
– SAS/SATA cable
Connect the SAS/SATA cable from the farther connector on rear of the 2.5-inch HDD cage with
the right connector on the Internal RAID Controller. Connect another SAS/SATA cable from the
nearer connector with the left connector on the Internal RAID Controller.
– SGPIO cable
Connect the SGPIO cable with SGPIO A connector on mother board.
SGPIO cable
SAS/SATA cables
Power connectors
Mother board
Power cable
Advertisement
Table of Contents
