Ir Data Exchange; Positioning Of The Phones; Ir Send - NEC N400i User Manual

IR Data Exchange

Your phone is equipped with an InfraRed (IR) data port which enables you to exchange phonebook entries, picture files, schedule entries and ToDo
entries with cellphones or other devices equipped with IR ports.
Do not aim or direct the IR data port towards your or other people's eyes when using IR data exchange.
Do not aim or direct the IR data port towards another IR device as this may cause the device to malfunction.

Positioning of the phones

Open both sending and receiving phones vertically and place them as their IR ports face each other with less than 20cm of interval.
Do not place anything between IR ports.
The angle made of two IR ports must be within 30°.
Do not move the phones until the data exchange is complete.
The phones may not communicate successfully if they are placed under direct sunlight or
fluorescent light, or close to other infrared devices.
While sending or receiving data through IR, your phone is automatically placed out of service, so
phone call, Email and i-mode access are disabled.

IR send

You can send a phonebook entry, picture file, schedule entry or ToDo entry through the IR port.
Before starting to send data, the other party must be ready to receive data.
Phonebook entry
You can only send the phonebook entry stored in the phonebook (Phone).
You can only send Name, Home, Mobile, Work, Fax, 2 Email addresses and 2 pieces of descriptive information.
Your phone sends data according to the vCard 2.1 specification. Depending on the other party's cellphone or device, the data may not be received
correctly.
☛
With the standby screen displayed, press
You can also press
☛
Use the ▲ and ▼ keys to highlight a phonebook entry and press
You can also press ,
required number of times to display the phonebook (Phone).
4, 1 and 3 to display the phonebook (Phone) screen.
and 3.
and 0. The phonebook entry will be sent through the IR port.
15 or less
°
16