Kohler ANTIQUE K-258 Installation Instructions page 2

Fig. #4
INSTALLING THE K 264 TRIM
FOR DECK MOUNT BATH VALVE
1. Refer to Fig. #4. If replacing ceramic trim, loosen set screw
and pull handle off bonnet.
2. For new and replacement installations, place ceramic cap
into oval handle; secure from underneath with flathead
screw.
3. Align and place handle assembly onto bonnet; secure with
set screw.
CAUTION: To avoid damaging ceramic cap, do not
overtightenflathead screw.Recommended
maximum torque is 10 inch pounds.
SERVICE PARTS
1 42291 Ceramic Ring
2 52722 Ceramic Cap w/Flathead Screw
3 52407 Flathead Screw
4 52571 Ceramic Bell for Wall Mounted Bath
5 52568 Ceramic Bell for Lav., Bidet, Kitchen,
and Bar Sinks
3
1
2
4
2
5