Table of Contents
Advertisement
•
PUK/PUK2 code (respective personal unblocking code in case you forget the PIN/PUK code)
•
Phone code (provided along with the phone and have to be entered at the first security setting)
If you forget any of these codes, ALWAYS contact your service provider as they are the ONLY source for your
codes.
Change PINs
The PIN will be requested most of the times when the phone is switched on. This feature can be deactivated, at the
risk of unauthorized usage of your phone. Some mobile service providers do not permit the deactivation of this control.
You can set up your phone to require your
be used and receive any incoming calls. If you entered your
necessarily in the same session), you will have to contact your mobile service provider for a
your SIM card.
To activate PIN
•
From the main menu, select
PIN activate Enable/Disable. You will have to key in a
the option indicates that
PIN/PIN2/Phone code change
•
From the main menu, select
•
Select either
Change PIN
•
Key in the current code. You will be prompted to enter the new code when the correct current code is entered.
Enter the new code again and press
•
A confirmation screen is displayed momentarily and the phone returns to
Phone lock
The Phone lock menu allows you to lock your SIM card from unauthorized usage. If
can be accessed only when the correct PIN code is entered. To On/Off
•
From the main menu, select
•
Highlight
and press
Phone lock
indicates that
Phone lock
Bar calls
This feature allows you to restrict the following type of calls made or received on your phone. You will need a 4-digit
password provided by your mobile service provider to activate ring. You may have to register separately for each
type of ring.
•
All outgoing (All outgoing calls, except emergency numbers 112 and 999 will be barred)
•
Outgoing international (International outgoing - Only calls within the home country can be made on the phone)
entered when the phone is switched on before the phone can
PIN code
>
. Highlight
Settings
Security
has been activated.
PIN activate
>
>
Settings
Security
Code
/
/
Change PIN2
Chg. phone code
Left Softkey
to confirm the new code.
>
.
Settings
Security
Left Softkey
to toggle Phone lock On/Off. A tick in the check box beside the option
has been activated. You will have to key in a
incorrectly for more than three times (not
PIN code
and press
PIN activate
for activation. A tick in the check box beside
PIN code
.
.
display menu.
Code
Phone lock
, proceed as follows:
Phone lock
to activate Phone lock.
Phone code
to unblock
PUK code
Left Softkey
to toggle
These confidential
numbers should be kept in
a safe place for future
is On, SIM data
access, if required.
If the PIN2 code is entered
incorrectly 3 times, you will
need to contact your
service provider for a PUK2
code.
The PIN codes and security
codes are between 4 to 8
digits.
39
Advertisement
Table of Contents
