Connect To Your Player With A Static Ip - waves system AP420 User Manual

Connect to your player with a static IP

4. Connect to your player with a static IP
This procedure explains how to connect to your player
1
Get the serial number on the sticker located at the bottom of the player. It is labelled as per example:
AP4xx-123456.
2
Connect the player directly to the Ethernet interface of your computer.
3
Setup the Ethernet interface of your computer with the following parameters:
IPv4 address = 169.254.0.1 .
IPv4 mask = 255.255.0.0 (or 16)
4
Power on the player.
5
When the player is completely started, open a web browser and enter the following URL in the
address bar: http://169.254.128.1. Do not use the HTTPS prefix, use only the HTTP prefix.
Note : The AP420
available, another IP will be attributed to the player, from 169.245.128.1 to 169.245.128.254. To find
it, please use a IP scanner software like "Angry IP Scanner".
6
The first connexion page appears.
7
Follow "first login" section.
Résultat
Your player AP420
according to the specifications of your installation.
January 2023
14
uses a DHCP fallback feature to attribute its IPv4 address. If the first IP is not
is now ready to be used, and you can now configure the network parameters
Version : 0.46-beta (for firmware 1.0 or higher)
AP420 with a static IP.
AP420