Connect To Your Player On A Dhcp Network - waves system AP420 User Manual

AP420
3.

Connect to your player on a DHCP network

This procedure explains how to connect to your player
1
Get the serial number on the sticker located at the bottom of the player. It is labelled as per example:
AP4xx-123456.
2
Connect the player to the network.
3
Connect your computer to the same network.
4
Power on the player.
5
When the player is completely started, open a web browser and enter the following URL in the
address bar as per the example: http://ap4xx-123456. Do not use the HTTPS prefix, use only the HTTP
prefix.
6
The first connexion page appears.
7
Follow "first login" section.
Résultat
Your player AP420
January 2023
is now ready to be used.
Version : 0.46-beta (for firmware 1.0 or higher)
Connect to your player on a DHCP network
AP420 for the first time.
13