Advertisement
4.2. Couplings.
the wrench. A quick change coupling may then be used to connect the leader hose to the air line recoil hose. See figs. 1 & 2.
fig.1
5. OPERATION
‰
9
WARNING! Ensure you read, understand and apply safety instructions before use.
5.1.
Connect the wrench to the air hose as indicated in section 4.
5.2.
Set the integral air regulator to one of the four positions indicated. (See fig.3)
5.3.
Place the socket over the subject nut and depress the trigger to operate the wrench.
5.4.
To change wrench direction turn the switch on the head of the wrench. (See fig.3)
8
DO NOT
8
DO NOT
The direction of the air flow from the exhaust holes in the sleeve can be altered by rotating the whole sleeve to a suitable position.
5.5.
The sleeve can be rotated continuously through 360° (fig.3).
fig.3
6. MAINTENANCE
‰
9
WARNING!9
6.1.
6.2.
6.3.
Loss of power or erratic action may be due to the following:
a)
b
wrench out with gum solvent oil or an equal mixture of SAE No 10 oil and paraffin.
6.4.
6.5.
ENVIRONMENT PROTECTION
Note
Important
Warranty
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
. DO NOT
01284 703534
fig.2
sales@sealey.co.uk
9
www.sealey.co.uk
Advertisement
