EnGenius DuraFon 1X Quick Reference Sheet page 4

Hide thumbs Also See for DuraFon 1X:

When sharing a line with another non-EnGenius phone, I can't join in, they can't hear me?

EnGenius added this feature to avoid howling or feedback in speakerphone mode when starting a new call. Simply

press any digit to turn on the voice path. This feature is now on all DuraFon 1x with speakerphone (see also question

#10 above).

How different is the range using 2-Way or Broadcast Handset-to-Handset, as compared to Base Station-to-

Handset communication?

2-Way, and Broadcast Handset-to-Handset are independent of the Base Station. Range will be less than a typical

incoming call or broadcast from the Base Station, typically 25% to 50% less. If an external antenna is used on the

Base Station, the range difference will be even more noticeable. To maximize 2-Way or handset broadcasts, use the

long antenna on the handsets.

How do adjust flash time on a DuraFon 1X system?

From an admin phone (ID 11 or 12), PRESS MENU, 9, enter base 10, then PRESS 2 for flash time. The Handset's

default setting is either 500ms (milliseconds) or 600ms. PRESS 1 through 9 to choose from 100ms to 900ms. In

some cases adjusting the Flash Time down to 200ms may be necessary behind certain voice lines for proper 3-Way

call handling or transferring calls behind a PBX.

For further support please email

support@engeniustech.com

Revised 1/12/2012