Table of Contents
Advertisement
Connecting to the computer
USB port of
your
computer
•
Rotate the USB plug out of the player body and connect the player to your PC as shown.
•
The player will turn on automatically and display " USB--PC" on the display. The player will appear as a
drive letter on your computer, a Mass Storage Class (MSC) device, and behave as a detachable drive for
file transfer in one or both directions.
TM
•
The RCA easyRip
Computer (Vista and 7 users) in the Start menu, find and open the drive letter associated with the player
(i.e. RCA MP3) and then double-click the rcaeasyrip_setup.exe file to launch the installer.
•
The software installer can be deleted from the player after installation to free up more storage space*.
•
It may take several seconds for the player to be detected. Click View -> Refresh in My
Computer or Windows Explorer to make sure the player has been detected.
•
The player is capable of transferring files at USB 2.0. If a USB 2.0 port is available on your
computer, use it to connect to your player. The player is still backward compatible with the older USB
1.1 ports; however, you will not be able to take full advantage of the potential speed increase.
•
IMPORTANT: Do not disconnect the USB cable from either the PC or the player during the software
installation.
* The latest software can be downloaded from www.rcaaudiovideo.com.
Player
Media Software installer is stored on the player. Go to My Computer (XP users) /Go to
16
Advertisement
Table of Contents
