Connecting To The Computer; Charging The Player - RCA SL5016 User Manual
User manual
Hide thumbs
Also See for SL5016:
- Manual de l'utilisateur (29 pages) ,
- User manual (29 pages) ,
- Manual de usuario (29 pages)
Table of Contents
Advertisement
Available languages
Available languages
Before you begin
Connecting to the computer
•
Connect the player to your computer with the
USB cable provided. The player will turn on
automatically.
•
The player will be connected in MSC (Mass
Storage Class) mode. It will appear as a drive
letter on your computer and behave as a
detachable drive for file transfer in one or both
directions.
•
The RCA EasyRip™ Media Software installer
(stored in the player*) will launch automatically.
Click NEXT to begin the installation and follow
the instructions to install the software on your
PC.
•
The software installer can be deleted from the
player after installation to free up more storage
spaces.
USB port of your
Player
computer
USB cable
To enable function of launching RCA
EasyRip installer stored in the player, the
player must be in MSC mode which can
be selected under Protocol in the
Settings menu. The default setting of this player
is already in MSC mode. Refer to page 24 for
more information.
* The latest software can be downloaded from www.rcaaudiovideo.com.
•
It might take several seconds for the
player to be detected. Click Refresh
in My Computer or Windows Explorer
to make sure the player has been
detected.
•
The player is capable of transferring files at
USB 2.0. If USB 2.0 port is available on your
computer, use it to connect to your player.
The player is still backward compatible with
the older USB 1.1 ports. However, you will
not be able to take full advantage of the
potential speed increase.
•
IMPORTANT: Don’t disconnect the USB cable
to the PC or the player during the software
installation.
•
If the installer does not auto-launch, locate
and right-click the associated drive letter (i.e.
Lyra Slider) to show the option menu and
select the “Install RCA EasyRip™” option.
Charging the player
The player charges automatically every time you
connect it to your computer. To fully charge the
player, make sure your computer is on and the
device is connected for at least 3 hours. Refer to the
battery level icon
on the display to check the
battery level. Recharge the player when the icon is
empty.
Page 9
Advertisement
Chapters
Table of Contents
