Advertisement
SPECIFICATIONS
Projection type
Projection system
Scanning frequency
Retrace time
Video bandwidth
CRT
Lens
Picture size
Resolution
Pixel resolution
Light output
Contrast ratio
High voltage
Input
Convergence
Convergence limits
Warm up time
Setup signal
Power supply
Power consumption
Input current
Safety and regulation
: Refraction type
Projector and screen are separated
: 3 lens and 3 CRT's in-line
H 15 to 61.1kHz / V 38 to 150Hz (PG-6000/PG-6000G)
H 15 to 90kHz / V 38 to 150Hz (PG-9000/PG-9000G)
: H 4.0 µS (fH 15 to 30kH2)
H 2.5 µS (fH 30 to 9OkHz)
v 350 µS
: 70MHz (-3dB)
: 7 inch liquid cooling
Deflection angle 90 degrees
: Hybrid lenses multilayer coating F1.0
: 60 to 300 inches diagonal
: 1000TV lines
: 1280 × 1024 dots
: 800 lumens (Small area peak high light brightness)
: 1 : 20(HDTV method)
: 32kV
: RGB signal 0.7Vp-p 75ohm positive (BNC)
H/V sync 0.7 to 4.0Vp-p 75ohm negative or positive (BNC)
COMP sync 0.7 to 4.0Vp-p 75ohm negative o r positive (BNC)
Sync on G 0.3 to 0.6Vp-p 75ohm negative (BNC)
Video 1.0Vp-p 75ohm positive (BNC)
or (switchable)
S-video;
Y I .0Vp-p 75ohm positive
C 0.28Vp-p 75ohm (burst level)
Video system NTSC, PAL, SECAM and NTSC4.43
: Digital convergence (Pre-set 100 positions)
Quick copy convergence
Static and wave convergence
Point convergence:
: Less than 0.2% of V-height
: 20 minutes
: Cross hairs, Cross hatch. Dot, Window pattern, H test pattern
: AC 120V 60Hz (PG6000/PG-9000)
AC 220-240V 50Hz (PG6000G/PG-9000G)
: PG-6000.PG-6000G 430W
PG-9000/PG-9000G 500W
: 5.8A (AC 120V) PG-6000/6.7A (AC 120V) PG-9000
3.8A (AC 220.240V) PG-6000G/4.4A (AC 220-240V) PG-9000G
: PG-6000/PG-9000;
Meets FCC class A requirements
UL Approved (UL 1950)
Governed by IEC 950
CSA certified
Meets DHHS requirements
PG-6000G/PG-9000G;
Meets TÜV GS requirements
Governed by EN 60950 and IEC 950
Meets FTZ class B requirements
Governed by DBP Vfg. 243
Meets x-ray requirements
Governed by § Röntgenverordnung (RöV)
PG6000/PG-6000G Optional
PG-9000/PG-9000G Standard
23
Advertisement
