Cleaning And Maintenance; Quick Cleaning; Specifications - Proline HB200D Operating Instructions Manual

Processing Guide
Food
Carrot pieces
15mm x 15mm x 15mm
IMPORTANT : The continuous operating time must be less than 30 seconds and
then allow it to cool down for at least 3 minutes between cycles.

CLEANING AND MAINTENANCE

Warning: Always turn off and unplug the appliance before cleaning.
Ensure the appliance has cooled completely before cleaning.
NOTE : Do not immerse the blending attachment in water because over time the
lubrication on the bearings may wash away.

Wash the blending attachment under running water, do not use abrasive
cleaners or detergents. After finishing cleaning, place it upright so that any
water which may have got in, can drain out.

Clean the motor unit with a slightly damp cloth. Do not immerse it in water.
Dry the entire appliance with a dry cloth before replacing.
Do not use chemical cleaners or abrasives product for cleaning.

QUICK CLEANING

Between processing tasks, hold the hand blender in the cup half filled with water
and turn on for a few seconds.

SPECIFICATIONS

Ratings: 220-240V~ , 50-60Hz
200W
Max Time
30 1000g
seconds (400g carrot pieces and 600g water)
5
Max Quantity