System Q Zip ZIP408 Manual

1 Search
2 All Channels
3 Play/Pause
4 Record
5 Menu/ Exit
Step by Step First Time Setup
1. Connect a monitor to the NVR using a HDMI or VGA cable for the video, and turn on the monitor.
2. Connect the cameras to the NVR PoE Ports (Or PoE Switch) then power the NVR using the power supply provided.
Note - do not use a 3rd party or different power supply unless instructed to do so by the manufacturer.
3. Once the NVR has booted up, connect the USB, see Operation below and connect the Network cable to the NVR.
See Full Instruction Manual if you do not get an image on the monitor after "System Configuring".
4. Program the basic settings using Smart Setup.
Operation
IR Remote
Numeric Buttons
1
Control
Display All
2
Menu / Escape
3
Mute
4
Sub-menu
5
Navigation / Enter
6
Rewind
7
Fast Forward
8
Play
9
10 Record
Stop
11
Pause
12
Document ref: ZIP408, ZIP416
6 Direction Control
7 Ok (select) / PTZ Control
8 Power LED
9 HDD Indicator
10 USB Port
Mouse
Left-
Click
Right-
Click
Scroll-
Wheel
OSD Keyboard
ZipNVR.com
ZIP Pro NVRs - PoE
Zip is a registered trademark of System Q Ltd
Full Instruction Manual
https://systemq.com/PDF/
manual/xZIP4.pdf
Live view: display Quick Setting toolbar
Single Click
Menu: select and enter
Live view: drag channel
Privacy Masking and Motion Detection: select
Click & Drag
Digital zoom-in: zoom in to target area
Single Click Live view: show menu
Menu: exit current menu to upper level menu
Scrolling Scroll up / down through highlighted field /
drop down list
Delete character to left of the cursor
Confirm input
Switch keyboard to upper case letters and
Insert a space
Move courser left / right
target area
symbols
© 2023 System Q Ltd
1