Care And Cleaning - Zanussi ZDI14001 User Manual

Setting and starting a programme
Setting mode
The appliance must be in setting mode to accept some
operations.
The appliance is in setting mode when, after the activa-
tion:
• All the programme indicators are on.
If the control panel shows other conditions, press and
hold function buttons (B B ) and (C C ) at the same time until
the appliance is in setting mode.
Starting a programme without delay start
1. Open the water tap.
2. To set a programme, keep the appliance door ajar.
3. Press the on/off button to activate the appliance. The
on/off indicator comes on.
4. Make sure that the appliance is in setting mode.
5. Press the button of the programme you want to set.
• The related programme indicator comes on.
• The phase indicators of the set programme come
on.
6. Close the appliance door. The programme starts.
• The indicator of the phase in operation is on.
Starting a programme with delay start
1. Set the programme.
2. Press the delay button again and again until the indi-
cator of the number of hours you want to set flashes.
You can set 3, 6 or 9 hours.
3. Close the appliance door. The countdown starts.
• The delay indicator stops flashing.
• The phase indicators of the set programme go off.
• When the countdown is completed, the programme
starts.
– The indicator of the phase in operation comes on.
– The delay indicator goes off.
You can set a programme and the delay start also
with the appliance door closed. In this condition,

Care and cleaning

Warning!
Before maintenance, deactivate the appliance and discon-
nect the mains plug from the mains socket.
you have only 3 seconds after each setting before the ap-
pliance starts to operate.
Opening the door while the appliance operates
If you open the door, the appliance stops. When you close
the door, the appliance continues from the point of inter-
ruption.
Cancelling the delay start
Press and hold function buttons (B B ) and (C C ) at the same
time until the delay indicator goes off and all the pro-
gramme indicators come on.
When you cancel a delay start, the appliance goes
back to setting mode. You have to set the pro-
gramme again.
Cancelling the programme
Press and hold function buttons (B B ) and (C C ) at the same
time until all the programme indicators come on.
Make sure that there is detergent in the detergent
dispenser before you start a new programme.
At the end of the programme
When the programme is completed, the end indicator is
on.
1. Press the on/off button to deactivate the appliance.
The on/off indicator goes off.
2. Open the appliance door.
3. Close the water tap.
• For better drying results, keep the appliance door ajar
for some minutes.
• Let the dishes become cold before you remove them
from the appliance. Hot dishes can be easily damaged.
• First remove the items from the lower basket, then from
the upper basket.
There can be water on the sides and on the door of
the appliance. Stainless steel becomes cool more
quickly than the dishes.
Dirty filters and clogged spray arms decrease the
washing results.
Make a check regularly and, if necessary, clean them.
21