CONFIGURATION: SYSTEM CONFIGURE / SYSTEM TIME
UI Element
Date Format
Date Separator
Zone
Hour Type
NTP Enable
Update Interval
Host URL
Host Port
Save
Time Settings
Computer Time
Sync
Hall Technologies
February 03, 2023
Description
Select the desired format of the date: YYYY-MM-DD | MM-DD-YYY | DD-MM-YYYY
Select the desired date separator: . | - | /
Select the time zone.
Select the desired hour: 24 Hours | 12 Hours
Click to enable NTP (Network Time Protocol)
Select how often to update the time (only available when NTP is checked)
Enter the NTP host URL.
Enter the host port.
Press to save changes. Once saved, a small pop-up window will appear in the bottom right
of the screen saying the changes made have been saved.
Note: Some changes require the camera to be rebooted.
Select the time settings.
Shows the connected computer's time.
Sync's the selected time to the camera.
Page 42 of 52