Denver MTW-746 TWIN Operating Manual page 4

CONNECTING TO AC ADAPTOR
Ensure all the cable are disconnected with
connect to AC power source by AC Adaptor.
To power outlet
Mother Unit
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that
have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use
in 24V vehicles.
CAUTIONS:
! Use the unit only with the recommended car power
adaptor, use with other car power adaptor might damage
the unit.
!
The recommended car power adaptor is for use with this
unit only. Do not use it with other equipment.
!
In the interests of road traffic safety, do not operate the unit
or view video software while driving a vehicle.
!
Make sure the unit is fastened securely to prevent from
moving outside of the vehicle in an accident
!
When the inside of the cigarette lighter socket is dirty with
ashes or dust, the plug section may become hot due to
poor contact. Be sure to clean the cigarette lighter socket
before use.
!
After use, disconnect the car power adaptor from both the
unit and cigarette lighter socket.
FUSE REPLACEMENT
POSITIVE(+) CAP
NOTE: Don't throw out the positive(+) cap when replace the
fuse.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Slide POWER switch to turn on the player.
2. Open the disc tray by hand.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, move the navigation
buttons or press the numeric buttons to select a preferred
track number, then press ENTER/OK button to start playback.
mother
NOTE:
Before connect to
AC power, push the
POWER ON/OFF
AC Adaptor
switch to OFF.
FUSE
Note: If not any operation in four hours during playback, the
unit before unit will be switched off. Before switching off the unit, alert
information shows on the screen for warning, press
corresponding button to operate the unit for continuous
playback. If the unit is powered off automatically, it is
necessary to slide the POWER SWITCH to OFF position first,
then slide the POWER SWITCH to ON position to power on
the unit again.
ADJUST THE VOLUME
Press the VOLUME+/- button on the remote or press and hold
VOL+/- button on the unit to increase or reduce the volume.
MUTE
While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again to resume
sound output.
SKIP AHEAD OR BACK
Press PREV button during play to skip previous chapter
(DVD) or a track (CD), Press NEXT button during play to skip
next chapter (DVD) or a track (CD).
COLOR AND BRIGHTNESS ADJUSTMENT (FOR THE LCD
SCREEN)
Press TFT SET button on the remote repeatedly to adjust the
color intensity and brightness respectively via navigation
left/right button.
Press and hold this button for a moment to turn on or off the
TFT display.
RAPID ADVANCE/REVERSE
During playback, press and hold F.FWD button or F.BWD
button on the unit or press these two buttons on the remote
respectively to scan the disc forward or backward at X2, X4,
X8, X20 normal speed.
Press PLAY button to resume normal play.
PAUSE/STEP PLAY
Press pause/step button during playback to pause. during
pause mode, each time the pause/step button is pressed, the
player will only play one frame; to resume normal play, press
play button.
STOP PLAYBACK
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY button again, playback resumes at
the point it stopped previously; open the disc tray or press the
STOP button one more time to clear the resume function.
SLOW-MOTION PLAY (DVD)
Press SLOW button during playback, the disc will be played at
1/2 normal speed at first, each time this button is pressed, the
play speed becomes slower (down to 1/7 normal speed.)
Press PLAY button, normal play will resume.
REPEAT
Press REPEAT 1/ALL&A-B button during play, it will repeat
play one chapter/title or repeat all (for DVD disc), or repeat
play a track or all tracks (fo
between two specific points (A-B).
SEARCH FOR PREFERRED SCENE
1. Press SEARCH button during play and highlight the item to
be played (Title, Chapter, or Chapter time) by navigation
buttons.
2. Input the desired number or time via the numeric buttons.
3. Press OK button to confirm and the playback from the
located scene starts.
4. To exit search menu, press SEARCH button directly.
3
r CD), or repeat the sections