Sony SRS-X88 Service Manual page 31

ALL LED LIGHTS UP MODE
It can check the all LED (indicator) lights up.
Procedure:
1. Touch the [?/1] button to turn the power on.
2. Touch the two buttons of [UPDATE] and [NETWORK] simul-
taneously.
Touch (UPDATE button is usually not displayed)
3. Touch the [ PAIRING] → [VOL –] → [VOL +] button in
order (in less than 3 seconds).
4. It enters the all LED lights up mode, all LED (indicator) lights
up.
(Indicator with two or three colors lights up in orange, and
indicator with fi ve colors lights up in white)
5. Each time [UPDATE] button is touched, the color of [LINK]
indicator repeatedly changes in following order.
Color of [LINK]
Blue LED
indicator
White ON
Pink (Violet) ON
Light blue ON
Blue ON
Orange (Yellow) OFF
Red OFF
Green OFF
Light off OFF
light up
Releasing method:
Touch the [?/1] button to turn the power off.
ALL RESET MODE
It can initialize the all information on the unit and reset all setting
to the factory defaults.
Procedure:
1. Touch the [?/1] button to turn the power on.
2. Touch and hold the two buttons of [?/1] and [VOL –] simulta-
neously for four seconds.
3. The [?/1] indicator blinks and initialization is completed, then
enters the standby state.
Red LED Green LED
ON ON
ON OFF
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
OFF OFF
DEMO MODE A
It can operate the demonstration mode for the storefront exhibi-
tion. (AUDIO IN function)
Procedure:
1. Touch the [?/1] button to turn the power on.
2. Touch the each fi ve times [VOL +] → [
[VOL –] button in order (in less than 10 seconds).
3. It enters the DEMO mode, and it is set to the AUDIO IN func-
tion and volume 41.
Releasing method:
Touch the each fi ve times [VOL +] → [
–] button or [VOL +] → [ USB-B ] → [VOL –] button in order (in
less than 10 seconds).
Note: When disconnecting the AC adaptor from the unit, it will be enter
the standby state or power off state. But it cannot release the DEMO
mode.
DEMO MODE B
It can operate the demonstration mode for the storefront exhibi-
tion. (USB-B function)
Procedure:
1. Touch the [?/1] button to turn the power on.
2. Touch the each fi ve times [VOL +] → [ USB-B ] → [VOL –]
button in order (in less than 10 seconds).
3. It enters the DEMO mode, and it is set to the USB-B function
and volume 41.
Releasing method:
Touch the each fi ve times [VOL +] → [ USB-B ] → [VOL –] button
or [VOL +] → [ PAIRING] → [VOL –] button in order (in less
than 10 seconds).
Note: When disconnecting the AC adaptor from the unit, it will be enter
the standby state or power off state. But it cannot release the DEMO
mode.
SRS-X88
PAIRING] →
PAIRING] → [VOL
31