Bluetooth Module (Bt1) - Sony SRS-X88 Service Manual

SRS-X88

2-15. BLUETOOTH MODULE (BT1)

2 Peel off the adhesive sheet.
1 MAIN board connector
(CN010)
–
20
3 two screws
(BTTP M2.6 8)
8 holder (BT) block
boss
hole
terminal
side
terminal side
4 Remove the bluetooth module block
in the direction of the arrow.
–
7 hook
0 bluetooth module (BT1)
Note: When installing the bluetooth module (BT1),
align the boss and hole.
6 tapping screw
(P2 6)
9 cushion (BT)
guide line
5 flexible flat cable
(10 pin) (FFC1)
bluetooth module
(BT1)
bluetooth module (BT1)
When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
Between "1" and "5".
cushion (BT)
guide line
NG
Insert at a slant.
flexible flat
cable
colored line
connector