Electromagnetic Fields (Emf) - Philips AVENT SCF323 User Manual

Caution
● The appliance should not be left unattended when plugged into a power socket.
● Never stuff or insert any foreign object into the opening or silicone tube.
● Do not shorten the silicone tube.
● Before you connect the breast pump to the power, make sure that the voltage of the
appliance corresponds to the local power voltage.
● Wash, rinse, and sterilise the appropriate pump parts before each use.
● Do not use antibacterial, abrasive cleaners, or detergents when cleaning the breast
pump parts.
● Never put the breast pump parts or USB cable in water or steriliser, as you can cause
permanent damage to the pump.
● If the vacuum generated is uncomfortable or cause pain, switch off the breast pump,
break the seal between the breast and the pump funnel with your finger, and then
remove the pump from your breast. You can also pull off the silicone tube from the
motor or the cap to release the vacuum.
● Do not continue pumping for more than five minutes at a time if no result is achieved.
● Do not use the breast pump if the silicone diaphragm appears to be damaged or
broken. Replace the silicone diaphragm. See chapter "Ordering accessories" for
information on how to obtain replacement parts.
● For your baby's safety, always follow the instructions in the user manual for the bottles
and teats.

Electromagnetic Fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.
2 English