Unpacking Of The Embosser - Index V4 Manual

3.1

Unpacking of the embosser

Unpack the embosser gently and check the items, save the packing material and transport
locks in case of future transportation of the embosser.
The two (2) year warranty on parts is only valid if the embosser is transported in professional
packaging and transport locks properly in place.
The following is included in shipment:
Embosser
User manual
Index USB memory stick
Power cord
USB cord
External switched-mode power supply for Basic-D and Everest-D
Basic-D
Open the lid and remove the anti moisture bag.
Remove the transport lock from the back side of the embosser.
Store the transport lock in the transport lock holders, located on the back plate of the
embosser.
Everest-D
Remove the two plastic transport locks and anti-moisture-bag from the sheet feeder.
Store the transport locks in case of future transportation of the embosser.
Braille Box
1. Remove the protection transport
rubber seal
2. Open the paper tray and the service
door. Remove the transport protection
foam
3. Open the Braille tray by pressing the
Braille glass quite hard and remove the
accessory kit
© 2015 Index Braille
Installation 4
www.indexbraille.com