Table of Contents
Advertisement
C. FIT & USAGE
4. CHECK YOUR FIELD OF VISION
Some helmets may obstruct or block your vision when looking left, right,
up, or down.
Always make sure you can see well enough to safely operate your
vehicle.
5. TEST THE HELMET FIT
Place your hands on each side of the helmet. While holding your head as
motionless as possible, try rotating your helmet from left to right then up
and down. You should feel the helmet move the skin on your head and
face as you try to move the helmet.
If it is not the case or if you can feel the helmet padding sliding on your
head, it is too big. If the helmet is constricting or painful, it is too small.
6. FASTEN THE CHINSTRAP
Tighten it under your jaw until there remains no slack in the strap, and the
strap must be tight up against your jaw.
7. TEST THE CHINSTRAP FIT
• Put your hands on the back of the helmet and try to push the helmet off
by rotating it forward.
• Put your hands on the front of the helmet above your forehead (or on the
chin guard) and try to push.
• If helmet comes off, try another size or model.
Repeat steps 1 through 6 until you find a helmet that fits your head snugly
and securely.
WARNING
3. HOW TO TAKE THE HELMET OFF
1. Open the chinstrap.
2. Hold the lower ends of the chinstrap and pull them apart to ease
removal.
3. The helmet can now be removed easily from the head.
To avoid scratching any objects you might place the helmet on, we
recommend closing the chinstrap after you have taken the helmet off.
10
Advertisement
Table of Contents
