NuWave PIC GOLD 30211 Quick Start Manual

PIC
Precision Induction Cooktop

Quick Start

Press Start and the display will
show a default cooking time and tem-
perature of 1 hour at 375°F.

Pause/Clear

• Press Pause/Clear once to pause
cooking. The display will clear after
45 minutes.
• Press Start to resume cooking.
• Press Pause/Clear twice to clear out
the cooking settings.
Temperature Format: °F to °C
• Press Prog once.
• Press – once to display Fahrenheit.
• Press – again to display Celsius.
• Press Pause/Clear to finish.

Changing Wattage Setting

The PIC Gold defaults to 1500 watts. If
used somewhere with limited wattage,
you can adjust the PIC Gold's wattage
by pressing Watts until you reach the
desired power.
When cooking at lower wattages,
your cooking time may increase slightly.

Wattage and Amps

Power Setting Wattage Setting
600W
Max/Sear
5A
®
Gold

Adjusting Cooking Temperature

Increase or decrease the temperature
manually by selecting 1 of the 6 Preset
Temperature buttons, or by pressing –
or + to adjust the temperature down or
up in 10-degree increments.

Preset Temperature Buttons

Button
Low
Med/Low
Med
Med/High
High
Max/Sear

Stage/Programming Cooking

Program the PIC to cook at different
temperatures for different amounts of
time. Ex: High for 5 Min., Low for 3 Min.
1. Press Prog to set the stages.
2. Press High then Time and then
press + 5 times for 5 min. at High.
3. Press Low then Time and then
press + 3 times for 3 min. at Low.
4. Press Start to begin cooking.
You can add more stages by repeating
900W 1500W
steps 2 or 3 before pressing Start.
7.5A 12.5A
Quick Start Guide
Temperature Examples
100°F Warm
175°F Simmer
275°F Steam
375°F Stir/Deep Fry
425°F Boil/Saute
575°F Sear
Model: 30211

Adjusting Cooking Time

To cook for a specific time, or longer than
1 hour, set each column as follows. Ex: 3
hours and 45 minutes.
1. Press Time to set column one, then
press + 5 times to set 5 minutes.
2. Press Time again to set column
two, then press+ 4 times to set 40
minutes.
3. Press Time again to set column
three, then press + 3 times to set 3
hours.
The flashing digit is the number being
altered.

Delay Cooking

How to program the PIC to delay cook-
ing. Ex: Delay cooking for 6 minutes,
then cook on High for 3 minutes.
1. Press Prog to set the delay.
2. Press Time then press + 6 times to
delay for 6 minutes.
3. Press Prog then press High.
4. Press Time and then press + 3 times
to cook for 3 minutes.
5. Press Start to begin cooking.