Table of Contents
Advertisement
performance default values. These default values are quite demanding
and your system might not function properly if you are using slower
memory chips or other low-performance components.
6.10 Change Password
If you highlight this item and press Enter, a dialog box appears that
you can enter a supervisor password. You can enter no more than six
letters or numbers. Press Enter after you have typed in the password.
There will be the second dialog box asking you to retype the password
for confirmation. Press Enter after you have retyped it correctly.
Then the password is required for the access to the setup utility or
for it at start-up, depending on the setting of the password check item
in advanced setup.
36
Advertisement
Table of Contents
