Ide Devices Installation; Other Device Installation - YAYKON PRIME-845A6 User Manual

4.4 IDE Devices Installation

IDE devices include hard disk drives, high-density diskette drives, and
CD-ROM or DVD-ROM drives, among othes.
The mainboard ships with and IDE cable that can support one or two IDE
devices. If you connect two devices to a single cable, you must configure
one of the drives as Master and one of the drives as Slave. The documentation
of the IDE device will tell you how to configure the device as a Master
or Slave device. The Master device connects to the end of the cable.

4.5 Other Device Installation

4.5.1 Floppy Disk Drive Installation
The mainboard ships with a floppy disk drive cable that can support one
or two drives. Drives can be 3.5" or 5.25" wide, with capacities of 360K,
720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and connect power from the system power supply. Use
the cable provided to connect the drives to the floppy disk drive connector
floppy.
4.5.2 Sound Connector Port Installation
This mainboard has three audio ports connect audio device.
The left side jack(green) is for a stereo line-out signal. The middle jack
(blue)is for a stereo line-in signal. The right side jack (red)is for a
microphone.
4.5.3 Clear CMOS (JP3)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS. You
13