Clearance To Combustibles - Comfort Glow EUH1490 Owner's Manual

PREPARATION
Place the product on a firm, level surface and plug into a 120V 60Hz power outlet. Only operate product in upright
position.
OPERATION INSTRUCTIONS
Completely uncoil the cord and plug heater directly into a 110~120 Volt grounded AC wall outlet. Be sure the plug fits
tightly. A loose fit will cause overheating and damage the plug. Plug and cord may feel warm during normal usage.
This product can be used YEAR ROUND
Rotate the heat/fan control knob to desired setting Fan or Heat.
To select Fan Mode, turn the switch clockwise to the fan mode image.
To select Heat Mode, turn the switch clockwise to the low or high setting.
Turn the thermostat to its maximum position, once area has reached the desired temperature the thermostat should be
turned towards minimum, when the heater turns off stop turning dial, heater will now run to keep area at this
temperature.

CLEARANCE TO COMBUSTIBLES

Back......................................6 "
Sides.......................................6"
Top......................................24"
Front...................................36"
~ 4 ~