Clearance To Combustibles - Comfort Glow ECH270 Owner's Manual

Baseboard convection heater
Table of Contents

Advertisement

Available languages

Available languages

PREPARATION
Place the product on a firm, level surface and plug into a 120V 60Hz power outlet. Only operate product in upright
position.
OPERATION INSTRUCTIONS
Completely uncoil the cord and plug heater directly into a 110~120 Volt grounded AC wall outlet. Be sure the plug fits
tightly. A loose fit will cause overheating and damage the plug. Plug and cord may feel warm during normal usage.
To select Heat Mode, turn the switch clockwise to the low or high setting.
Turn the thermostat to its maximum position, once area has reached the desired temperature the thermostat should be
turned towards minimum, when the heater turns off stop turning dial, heater will now run to keep area at this
temperature.
OFF
LOW: 750W
HIGH:1500W

CLEARANCE TO COMBUSTIBLES

Back......................................6 "
Sides.......................................6"
Top......................................24"
Front...................................36"
THERMOSTAT
~ 4 ~

Advertisement

Table of Contents
loading

Table of Contents