Download
Share
Print this page
Little Seeds 1132015COM Assembly Manual
  1. Manuals
  2. Brands
  3. Little Seeds Manuals
  4. Indoor Furnishing
  5. 1132015COM
  6. Assembly manual

Little Seeds 1132015COM Assembly Manual

4 drawer 1 door dresser
Hide thumbs

Advertisement

Available languages

Available languages

Quick Links

Download this manual
B341132015COM0
Date of Purchase ___ / ___ / ___
Lot Number:

Advertisement

loading

Related Manuals for Little Seeds 1132015COM

Summary of Contents for Little Seeds 1132015COM

  • Page 1 B341132015COM0 Date of Purchase ___ / ___ / ___ Lot Number:...
  • Page 2 - Call 1-800-489-3351 Serious or fatal crushing injuries can occur from tipping furniture. Follow little seeds on WARNING: Manufacturer assumes no liability for improper installation or excessive loads placed on screws or bracket. This wall anchor is not a substitute for proper adult supervision.

  • Page 3: Helpful Hints

    Do NOT return this product! Contact our friendly customer service team first for help. Call us! Assembly Tips 1-800-489-3351 Monday-Friday 9am - 5pm CST Tube Visit littleseedskids.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 - Open your item in the area you plan to keep it for less heavy lifting - Identify, sort and count the parts before attempting assembly...
  • Page 4 Please Note: You may need to lightly tap the wood dowels into the holes during your assembly process. littleseedskids.com...

  • Page 5: Board Identification

    Board Identification Lower Partition Upper Partition 31132015040 31132015030 Left Panel Right Panel 31132015010 31132015020 Bottom Shelf 31132015060 31132015050 31132015070 Door Upper Drawer Front Left Drawer Front Right Drawer Front 31132015080 31132015090 31132015100 31132015110 littleseedskids.com...
  • Page 6 Board Identification SIDE SIDE SIDE SIDE Left Upper Drawer Side Right Upper Drawer Side Left Drawer Side Right Drawer Side 39991120346510L 39991120346510R 39991167346510L 39991167346510R BACK BACK Drawer Back Upper Drawer Bottom Upper Drawer Back 39991167052017B 39991340076510D 39991120075418B Back Panel K113201500 This piece is paperboard construction.
  • Page 7 Board Identification SIDE BACK SIDE Upper Drawer SIDE SIDE BACK BACK SIDE SIDE Right Drawer Left Drawer littleseedskids.com...

  • Page 8: Parts List

    Parts List Please Note: Your model may contain extra hardware. Actual Size #A23030 #A22700 #A11080 #A22710 #A21670 confirmat cam lock cam bolt 7/16" flat head wood dowel #A12120 #A89370 #A17400 #A21975 #A14220 door bumper 7/8" truss head drive fastener 7/16" pan head 1/2"...
  • Page 9 Parts List Not Actual Size #A54900 #A44680 drawer brace #A65640 hinge left right left right cabinet cabinet drawer drawer member member runner runner #A56770 drawer slide package littleseedskids.com...

  • Page 10: Before You Start

    Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Parts are labeled on the surface or edge of part Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, Phillips Head Screwdriver and Hammer Cam Lock Fastening System This Cam Lock Fastening System will be used throughout the assembly process.
  • Page 11 Step 1 Caution: If you are using a power drill or a power screwdriver for screwing, please be aware to slow down and stop when the screw is tight. Failure to do so may result in stripping the screw. marked with a "L" (x3) (x9) marked with a "L"...
  • Page 12 Step 2 Quick Assembly (x2) Proper orientation of CAM LOCK (x2) (x2) littleseedskids.com...
  • Page 13 Step 3 marked with a "R" (x1) (x3) (x2) (x2) (x2) Quick Assembly Proper orientation of CAM LOCK littleseedskids.com...
  • Page 14 Step 4 Quick Assembly Proper orientation of CAM LOCK (x4) (x4) littleseedskids.com...
  • Page 15 Step 5 marked with a "L" (x1) (x6) marked with a "R" (x1) finished edge marked with a "L" marked with a "R" littleseedskids.com...
  • Page 16 Step 6 marked with a "R" (x2) (x6) (x2) (x2) Quick Note: Slides will stick out in Assembly front of partition front edge. Proper orientation of CAM LOCK finished edge marked with a "R" littleseedskids.com...
  • Page 17 Step 7 (x2) finished edge finished edged face up littleseedskids.com...
  • Page 18 Step 8 (x2) finished edged face up littleseedskids.com...
  • Page 19 Step 9 finished edged face up littleseedskids.com...
  • Page 20 Step 10 (x6) finished edged face up littleseedskids.com...
  • Page 21 Step 11 (x1) (x6) Do not fully tighten this screw in this step. littleseedskids.com...
  • Page 22 Step 12 littleseedskids.com...
  • Page 23 Step 13 IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. (x32) unfinished surface 2 people are required for this step. Carefully turn the unit over onto its front as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown.
  • Page 24 Step 14 (x5) (x20) NOTE: The legs angle outward. Do not get screws #8 & #9 mixed up. Screw #9 has a larger head and body. littleseedskids.com...
  • Page 25 Step 15 NOTE: On the following steps (15-19) you will be assembling the two upper drawers. SIDE SIDE Insert the "claws" at the end of drawer sides into the holes of drawer front and while keeping slight downward pressure, swing out until drawer side is straight up. NOTE: The drawer sides will be slightly unstable until the drawer bottom is installed (step 16).
  • Page 26 Step 16 SIDE finished surface finished surface SIDE littleseedskids.com...
  • Page 27 Step 17 (x8) You will need to tap with a hammer to fasten. BACK SIDE SIDE littleseedskids.com...
  • Page 28 Step 18 (x4) (x2) (x8) (x4) Attach the handles after the slides are mounted. SIDE SIDE littleseedskids.com...
  • Page 29 Step 19 BACK littleseedskids.com...
  • Page 30 Step 20 NOTE: Steps 20 to 23 apply to both the Left Drawer and the Right Drawer. SIDE SIDE Insert the "claws" at the end of drawer sides into the holes of drawer front and while keeping slight downward pressure, swing out until drawer side is straight up.
  • Page 31 Step 21 finished surface SIDE finished surface SIDE littleseedskids.com...
  • Page 32 Step 22 (x8) You will need to tap with a hammer to fasten. BACK SIDE SIDE littleseedskids.com...
  • Page 33 Step 23 (x2) (x2) (x8) (x2) Attach the handles after the slides are mounted. SIDE SIDE littleseedskids.com...
  • Page 34 Step 24 (x1) (x1) (x2) (x1) littleseedskids.com...
  • Page 35 Step 25 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING Serious or fatal crushing injuries can occur from furniture tipover.
  • Page 36 Step 26 littleseedskids.com...
  • Page 37 Step 27 roller cabinet member rodillo corredera de mueble rouleau coulisse du cabinet drawer runner deslizador de cajón roller coulisse du tiroir rodillo rouleau littleseedskids.com...
  • Page 38 Step 28 Door Adjustment To adjust the vertical height: Loosen the screws "A" on both hinges. They are usually in slotted holes which allows you to adjust up or down by a few mm. Then tighten back up. To adjust side to side: Loosen the screw "C"...
  • Page 39 This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 75 lbs. 30.0 kg 20 lbs. 9.1 kg 30 lbs. 13.6 kg (each drawer) Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television.
  • Page 40 Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Little Seeds product, and to give us your valuable feedback. littleseedskids.com...
  • Page 41 Consejos Útiles (página 3) - Abra su artículo en el área donde usted planea utilizarlo para evitar levantar y moverlo menos pesado - Identificar, ordenar y contar las piezas antes de intentar ensamblar - Las clavijas de compresión se golpean con un martillo - Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta - Asegúrese de que siempre el punto localizado en la parte superior de bloqueador de leva este volteadohacia borde exterior...
  • Page 42 Paso 11 No apriete por completo este tornillo en este paso. Paso 13 ¡IMPORTANTE! EL PANEL TRASERO ES PARTE ESTRUCTURAL DE ESTA UNIDAD Y SE DEBE INSTALAR DE LA MANERA APROPIADA. Este paso requiere de dos (2) personas. Gire la unidad con cuidado sobre su lado frontal, como se muestra. Asegúrese de que la unidad esté...
  • Page 43 Paso 20 NOTA: Loas pasos 20 a 23 aplican tanto a la Gaveta Izquierda como a la Gaveta Derecha. Inserte los "ganchos" al final de los laterales de la gaveta dentro de los agujeros del frente de la misma y, manteniendo una leve presión hacia abajo, balancee hacia afuera hasta que el lateral de la gaveta quede recto.
  • Page 44 OPCIÓN 1: Fijación a montante (método preferido) Con ayuda de un detector de vigas, ubique un montante en la pared. Coloque su unidad contra la pared, con el soporte de seguridad alineado en esta ubicación. Para facilitar la colocación del tornillo, puede taladrar un agujero piloto de 1/8"...
  • Page 45 Página 39 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...

  • Page 46: Astuces Utiles

    Astuces Utiles -Ouvrez votre article dans la zone que vous prévoyez de le garder pour moins de levage lourd -Identifier, trier et compter les pièces avant d'essayer d'assembler -Les goujons de compression sont taraudés avec un Marteau -Les glissières sont marquées d'un R (droit) et d'un L (gauche) pour un bon placement -Assurez-vous toujours de faire face la pointe situé...
  • Page 47 Étape 11 Ne serrez pas complètement cette vis lors de cette étape. Étape 13 IMPORTANT! LE PANNEAU ARRIÈRE EST UN ÉLÉMENT STRUCTUREL DE CE MEUBLE ET DOIT ÊTRE MONTÉ CORRECTEMENT. Deux personnes sont requises pour cette étape. Retournez délicatement le meuble sur sa face avant, comme indiqué. Assurez-vous qu'il est d'équerre.
  • Page 48 Étape 20 REMARQUE : Les étapes 20 à 23 s'appliquent à la fois au tiroir de gauche et au tiroir de droite. Insérez les « griffes » à l'extrémité des côtés du tiroir dans les trous de la façade du tiroir et, tout en maintenant une légère pression vers le bas, faites-les pivoter jusqu'à...
  • Page 49 OPTION 1 : fixation à un poteau mural (méthode préférée) À l'aide d'un détecteur de montants, trouvez un poteau mural. Placez votre meuble contre le mur, avec l'entretoise de sécurité alignée sur l'emplacement du poteau. Pour faciliter l'insertion de la vis, vous pouvez percer un trou de guidage d'un diamètre de 3 mm à travers l'entretoise de sécurité...
  • Page 50 Page 39 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé...