Safety; Connections; Intended Purpose - Pronomic TL 200 Operating Manual

SAFETY

Before fitting or removing the unit, ensure that the power cord
is disconnected from the mains.
Make sure that the unit is positioned so that no one can trip
over the power cord.
1.
Do not use this product near water (e.g. near a bathtub, sink, in a wet
basement or near a swimming pool, etc.).
2.
Do not place this product near heat sources such as radiators, vents or other
equipment (including amplifiers) that produce heat.
3.
Connected this product to a power supply that complies with the type described
in the operating instructions or specified on the product only. Replace the fuse
with one of the specified types, sizes and ratings only.
4.
The product should be serviced by qualified service personnel if:
A. The power cord or plug has been damaged.
B. Objects have fallen into the product or liquid has been spilled on the
product.
C. The product was exposed to rain.
D. The product does not seem to function normally or it has a significant
change in performance.
E. The product has been dropped and / or the housing is damaged.
5.
Do not attempt to service the product beyond the points described in the user
manual. All other service work should be assigned to qualified service
personnel.

Connections

Before using the unit, ensure that your mains voltage corresponds to voltage
indicated on the unit.

Intended Purpose

The power amplifiers of the TL series are designed for standard 19-inch rack-
mounting.
2022-11-21 Pronomic TL Serie / ArtNr.: 00063864/00021732/00021733/00021734
Power amplifier TL series
3