Power amplifier TL series
Product Description
The instructions in this manual apply to all TL Series power amplifiers. The
operation and functions of these devices are identical unless stated otherwise.
All professional power amplifiers of the TL series have:
•
volume control; Parallel balanced XLR and 1/4 "TRS inputs, stereo (dual
channel), parallel input or bridged mono mode with selector switch.
•
3 selectable input sensitivities (sensitivity), clip limiter, ground lift switch,
screw terminals (banana plug) and Speakon outputs.
•
2 fans with two speeds for cooling; Soft start function when switching on,
silent switching on and off, independent DC and thermal overload protection
on each channel, short circuit and loudspeaker protection, built-in current
limiter.
•
Front LED indicators: Power, Signal, Clip, Protect.
•
Roadworthy, rugged 2U / 3U chassis.
•
230 V (50 Hz) AC and IEC power cord.
Power Supply
Check that the mains voltage corresponds to 230 V (50 Hz) AC selector switch.
Using other voltages than specified can cause irreparable damage to the unit.
The device must be connected directly to the mains. Do not use dimmer or
controllable power supply.
Scope of Delivery
1.
User manual
2.
Power amplifier of the TL series
3.
Power cable
2
Pronomic TL Serie / ArtNr.: 00063864/00021732/00021733/00021734
Warning, electricity
General warning sign
2022-11-21