Subscribe to Our Youtube Channel
Related Manuals for Hanna Instruments HALO2 HI9810452
Summary of Contents for Hanna Instruments HALO2 HI9810452
- Page 1 INSTRUCTION MANUAL HI9810452 Wireless pH Tester for Meat with built-in specialized electrode Foodcare Hanna Instruments Inc., 584 Park East Drive, Woonsocket, RI 02895 USA www.hannainst.com...
-
Page 2: Table Of Contents
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner, Hanna Instruments Inc., Woonsocket, Rhode Island, 02895, USA. Hanna Instruments reserves the right to modify the design, construction, or appearance of its products without advance notice. -
Page 3: Preliminary Examination
Preliminary Examination 1. PRELIMINARY EXAMINATION Remove the tester and accessories from packaging and examine them carefully. For further assistance, please contact your local Hanna Instruments office or email us at tech@hannainst.com. Each HI9810452 is supplied with a starter kit consisting of: •... -
Page 4: General Description & Intended Use
3. GENERAL DESCRIPTION & INTENDED USE HI9810452 is a professional wireless pH tester, part of Hanna Instruments HALO2 family. • The integrated Bluetooth module allows the tester to be connected to a compatible smart device with the Hanna Lab App. -
Page 5: Functional Description & Lcd Display
4. FUNCTIONAL DESCRIPTION & LCD DISPLAY Front & Back view Setup Removable sleeve Maximum immersion level ON/OFF button button Minimum immersion level Battery cover pH electrode FC097 removable blade LCD display 1 Calibration indicator 6 Temperature compensation 88. 8 . 8 2 Stability indicator 7 Second LCD line 3 Battery percentage indicator 8 Temperature unit... -
Page 6: Setup
Setup 6. SETUP The Setup button is located inside the battery compartment. After Setup configuration, replace the cover. Setup Menu Navigation • Press the Setup button to enter Setup mode and navigate menu items. • To exit Setup mode, press the Setup button after “ SEt TIME ” option is displayed. •... -
Page 7: Bluetooth
Bluetooth 7. BLUETOOTH With “ PAIr BLU ” or “ On BLU ” selected in Setup, the Bluetooth icon ( & ) will blink for up to 45 seconds, indicating the tester is in discoverable mode. Once connected, the icon will stop blinking. If not connected, the icon is not displayed. -
Page 8: Procedure
Calibration Procedure For most applications it is recommended to start with pH 7.01 buffer (or pH 6.86). To restore factory defaults, press and hold the ON/OFF button. “ CAL CLR ” is displayed. Note: It is recommended to calibrate the electrode with buffers at the temperature it will be used at. Stand-Alone Tester (Up to Three-Point Calibration) 1. -
Page 9: Care & Maintenance
Care & Maintenance 10. CARE & MAINTENANCE • Do not immerse the tester over the maximum immersion level. • Fresh buffer should be used for each calibration. Once the sachets are opened the buffer value can change over time. • For improved accuracy a two-point calibration is recommended. •... -
Page 10: Warning & Error Messages
Warning & Error Messages 11. WARNING & ERROR MESSAGES “---- WRNG” displayed during Invalid buffer. ---- calibration. Check the buffer value and use fresh buffer. WRNG Measured value is out of electrode range. 12. 0 2 Measured value displayed blinking. Clean the electrode to improve condition. -
Page 11: Abbreviations
If the repair is not covered by the warranty, you will be notified of the charges incurred. If the tester is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization (RGA) number from the Technical Service department and then send it with shipping costs prepaid. -
Page 12: Certification
Certification CERTIFICATION All Hanna Instruments conform to the CE European Directives and UK Standards. Disposal of Electrical and Electronic Equipment. The product should not be treated as household waste. Instead, hand it over to the appropriate collection point for the recycling of electrical and electronic equipment, which will conserve natural resources.
Need help?
Do you have a question about the HALO2 HI9810452 and is the answer not in the manual?
Questions and answers