Technical Specifications - Bosch+Sohn boso aneroid User Instructions

Cuffs
Only use boso cuffs that are suitable for your device (1-tube, 2-tube
or 2-in-1 tube cuffs). The cuff must be chosen to fit the arm circum-
ference. To obtain reliable measurement results, please measure the
arm circumference with a measuring tape and compare it with the
information on the cuff. If you need a different or a range of cuff size(s),
please contact your dealer.
Supplementary instructions
for fitting the boso nova S
EN
Wall model:
Mount the wall screws in the wall according to the enclosed drilling
template. Hook the unit into the mounted wall screws from above.
Additional accessories:
Spiral tube, 2 screws 4x35, 2 wall anchors 6x30, drilling template.
Rail model:
The unit can be fixed with the rail clamp for standard rails in the
hospital area. To do this, tighten the screw clockwise.
Additional accessories:
Spiral tube, rail clamp with screw.
Stand model:
Assemble the stand according to the enclosed instructions. Attach the
device to the stand.
Additional accessories:
Spiral tube.
14

Technical specifications

Measuring range Pressure display accuracy
0 – 300 mmHg ± 3 mmHg or 2% of
the reading values
(larger value applies)
Cleaning device and cuff
To clean the device, please use only a soft, dry cloth.
To clean the cuff, please remove the rubber bag. The cuff sleeve can
be washed by hand at max. 30 °C.
Disinfection
For disinfection of the device by wiping (minimum exposure time
5 min.) and for spray disinfection of the cuff we recommend the
disinfectant Microzid Sensitive Liquid (Schülke & Mayr).
Disinfect the device and cuff after each measurement on a patient.
The boso aneroid devices described in these instructions for use are
intended for reuse on multiple patients.
Storage conditions Operating conditions
+ 70 °C +40 °C
-10 °C
-30 °C
85 %
85 %
15 %
15 %
15
EN