B
Control panel
Buttons
14
•
B1 – Press this button to adjust the refrigeration compartment cycle setting from1, 2, 3, 4
to 5.
•
B2 – Press this button to select either Smart or Super mode and user settings.
Lights
•
L1 – Indicates the refrigeration compartment setting.
L2 – comes on after selecting the Smart mode .
•
•
L3 –
comes on after selecting the Super mode.
Operation
Temperature setting
• Press the Mode button (B2) to select the user settings.
• Press the Adjust button (B1) to adjust the refrigerator settings. A lower setting corresponds
to a lower temperature. The freezer temperature is controlled automatically at around - 18 °C.
Smart node
• Press the Mode button (B2) to select the Smart mode.
• The appliance operates automatically according to the dominant ambient temperature
around the appliance.
Super mode
• Press the Mode button (B2) to select the Super mode .
• The appliance operates to increase the cold setting in the freezer compartment to its highest
level. After 54 hours, the initial defined temperature is automatically reset.
Switching off the appliance
• Press the second Adjust button (B1) and keep it held down for 5 seconds to switch off the
appliance. Press the button again for5 seconds to switch on the appliance.
Refrigerator door opening alarm
• The alarm sounds if the door is left open for 90 seconds and only stops when the door is
closed.
Using the appliance
9
EN