Specifications - NEC MultiSync FE791SB User Manual

Monitor

Specifications

Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
MSFE791990991Manual.p65
MultiSync ® FE
Monitor
Diagonal: 17 inch
16 inch
Radius: 50,000 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
30 kHz to 96 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 50 to 146 Hz
832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz ...................... NEC-Mitsubishi Electronics Display cites
1152 x 870 @ 50 to 103 Hz
1280 x 1024 @ 50 to 89 Hz
1600 x 1200 @ 50 to 76 Hz
315 mm/12.4 inches
Vertical: 236 mm/9.3 inches
325 mm/12.8 inches
244 mm/9.6 inches
AC 100 – 240 V, 50-60 Hz
1.9A @ 100-240 V
397 mm (W) x 392 mm (H) x 415.5 mm (D)
15.6 inches (W) x 15.4 inches (H) x 16.4 inches (D)
17.2 kg
37.9 lbs
+5°C to +35°C / +50°F to +90°F
Humidity: 10% to 90%
Feet: 0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 50,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
10
791 SB
Notes
90° deflection, 0.25 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, multi-layered,
anti-static screen coating, dark-tint screen
and OptiClear screen.
®
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
8/29/02, 11:14 AM