Kaito Voyager MAX KA900 User Manual page 7

®
KA900 Voyager MAX Emergency Radio
Charging by Personal Computer's USB Port
1. Correct connect the radio's Micro-USB power input port to the personal computer's USB port
with the attached Micro-USB charge cable.
2. When the your personal computer is running, it powers the radio through the USB port, the
ability to charge and the time will depend on the performance of the PC's USB port.
3. While charging, the battery strength symbol on the LCD will flow from right to left, and the
red LED charging indicator will flash regularly, indicating that charging is in progress. When the
battery is fully charged, the LED charge indicator will turn off and the battery strength symbol
will stop flowing and its such as . Then disconnect the radio and AC power adapter.
4. You can also use other powered devices that have USB port to power the radio like a power
bank.
CAUTIONS!
When charging by personal computer, the USB connect symbol is shown on the radio's display.
Please press the [ESC] button to exit the USB connection
symbol interface, back to the main menu and reselect your
desired listen mode.
CAUTIONS!
When charging, please long press the [
Because alternating current can interfere with the radio reception signal, so it is not advisable
to use the AM or Shortwave band when charging.
Please remove the built-in rechargeable lithium battery or fully charge it once in 2 months if
the radio is not used for a long time.
When the radio is turned off and the external charger is used to charge the radio, the LCD will
display the current time and turn off after a certain period of time. The display time is related
to the backlight timer setting of the LCD. For details, refer to the date and the backlight timer
chapter.
User's Manual
Connect the PC's USB port
] button to turn off the radio.
9
®
KA900 Voyager MAX Emergency Radio
Charging by Crank Dynamo Power
In some emergency situations caused by the weather or other reasons, can not use the AC
power or can not replace the battery, you can use the crank dynamo,s emergency power supply
for the radio. Whether using the radio, flashlight or reading lamp, this generator can provide
enough emergency power to help users.
1. To get started, pull out the dynamo crank handle from its recessed holder.
2. Turn the dynamo crank handle on the clockwise or reverse direction at a steady speed to
generate power, to charge the rechargeable lithium battery, the red charge indicator will light
on front panel of the radio. All you have to do is turn the crank handle for about 1 to 2 minutes
or more, and turn off the radio and charging will be much more efficient.
Clockwise
Counterclockwise
3. Connect your cellphone or other devices with the USB output port on rear of the radio via
charge cable. And setting the power input or output switch to "OUT" position. Turn the dynamo
crank handle to charge the cellphone or other devices for emergencies. Before this, make sure
your phone is using DC 5V charging voltage.
Charging the Cellphone or Other Devices
User's Manual
Turn the Dyanmo Crank Handle
10