Kaito Voyager MAX KA900 User Manual page 16

®
KA900 Voyager MAX Emergency Radio
+
Forward Progress Button
Use the ATS(Auto Tuning Storage) Tuning
Use the auto search function in sub-menu of the band to tuning and storage the radio stations.
Adjust the radio's volume to an appropriate level and choose your desired band.
Press the [MENU] button to into the sub-menu and select the [Auto Search] submenu, press
the [MENU] button again to start auto tuning and store all the available radio stations into
memory in the AM, FM or Shortwave band. If the auto-tuned station frequency is inaccurate,
use the manual tuning to find the accurate radio frequency point.
When using the ATS function, it takes some time to complete the auto-tuned process, and you
can observe the frequency change of the LCD screen. When the auto tuning storage function
is complete, the radio returns to the M001 memory location automatically and plays the current
radio station.
You can also press the [ESC] button or other buttons to exit the auto-tuning function, the radio
frequency points that have been tuned and stored in the memory will be automatically saved
until you perform the next times the auto-tuning function.
SW12
22.995
The radio's memory location capacity is as follows:
User's Manual
Backward Progress button
Save
Delete
Delete All
Auto Search
Memory locations
M122
MHz
FM band: M001 - M440
AM band: M001 - M132
Shortwave band: M001 - M928
27
®
KA900 Voyager MAX Emergency Radio
CAUTIONS!
Using this auto tuning storage function will takes a long time in the short wave band.
When using this feature, place the radio in a position that has a good reception of broadcast
stations.
The NOAA Weather band can not use this function.
Memory Recall
Adjust the radio's volume to an appropriate level and choose your desired band.
Press the [M+] or the [M-] buttons to recall a station stored within the memory in the radio.
Press the [M+] button will follow the ascending mode and exhale the radio station stored in
memory and played. Press the [M-] button will follow the Descending mode and exhale the
radio station stored in memory and played.
M+
EQ
Forward Recall Stored Radio Button
Direct Frequency Entry
Adjust the radio's volume to an appropriate level and choose your desired band.
In the AM, FM and Shortwave band, enter the frequencies value corresponding to the radio
station by using the numeric buttons from the [ 0 ] to [ 9 ], and then press the corresponding
band button such as the [FM], [AM] or [SW] buttons, directly entry a radio station frequency
you want.
Numeric buttons
User's Manual
M-
Backward Recall Stored Radio Button
1 2 3
MENU
4 5 6
ESC
7 8 9 0
28