NL Troubleshooting
Malfunction
Rust traces on the cutlery.
There are detergent
residues in the detergent
dispenser or in the tablet
dispenser.
Abnormal foaming
present.
Home Connect problem
Malfunction
Home network is not
being set up.
WLAN indicator flashes.
Home Connect cannot be
carried out correctly.
52
Cause
Cutlery also rusts when it
is together with rusty
objects are washed.
Salt content in the washing
water is too high.
The spray arms were
blocked by crockery,
which prevented the
detergent from being
rinsed away.
Dishwasher detergent dispenser laundry
damp when filling the
detergent.
There is hand
dishwashing liquid in the
rinse aid reservoir.
Rinse aid has been
spilled.
Used detergent or
cleaning product
produces too much foam.
Cause
WLAN on the router is not
active.
Connection to the home
network is not available.
Home Connect incorrectly
set.
There is a technical
malfunction.
Troubleshooting
Do not wash rusting objects
▶
off.
Remove spilled softening salt from
1.
the rinse aid container.
Tightly close the lid of the
2.
softening salt reservoir.
Make sure the spray arms are not
▶
locked and free to rotate.
Only put the detergent in
▶
a dry detergent dispenser.
Fill rinse aid directly into the
▶
reservoir.
→ "Fill rinse aid",
Page 26
Remove the rinse aid with
▶
a cloth.
Use a different brand of dishwasher
▶
resourse.
Troubleshooting
Check the wireless network
▶
connection from your router.
Activate the wireless network
▶
binding on your router.
Take the with Home Connect with you
▶
supplied documents.
Take the support details in the
▶
Please observe the documents
supplied for Home Connect.