Advertisement
Memory Keys
How To Program Memory Keys
The Memory Keys are not preset and can be
programmed to any of the following:
Extensions,
-
Lines,
-
Common Pool numbers,
-
Private Pool numbers,
-
Some system features,
-
Function codes (of at most 8 digits).
-
You may program the Memory Keys as follows:
1. In the Setting Mode, enter the Phone Settings
menu, and then the Key Settings sub-menu.
2. Select the option that you require from the
options listed above.
3. Press the Memory Key that you wish to
program.
4. Proceed as indicated by the LCD messages.
If you wish, you may use the Auto Settings option in
the Key Settings sub-menu to program all of the
Memory Keys at the same time. Refer to pg 9 for
details.
Following are the main points to program the
Memory Keys:
•
Each Memory Key may be programmed for two
different
Secondary
Memory Key, if a feature is to be assigned to its
Primary Function, the key should be pressed until
the first "beep" (the LED lights up green). If a
feature is to be assigned to its Secondary
Function, then the key should be pressed until the
second "beep" (the LED lights up red).
•
To program the Memory Keys for certain system
features, you are required to select the feature
among the alternatives as indicated by the LCD
messages. The features and their LED status are
listed below:
Feature
Follow Me
Call Back
functions:
Function.
Primary
While
programming
LED Status (Red)
ON: Active.
ON: Active.
Function
and
a
Advertisement
