Subscribe to Our Youtube Channel
Related Manuals for EDS NEPTUNE EGIM
Summary of Contents for EDS NEPTUNE EGIM
- Page 1 NEPTUNE EGIM ADDRESSABLE GAS DETECTION SYSTEMS 4-20mA ENTRANCE MODULE Installation Manual www.edselectronic.com...
-
Page 2: Product Family
EXPLANATION EGIM 4-20mA entrance module supplies the easy connection of gas detectors from the outside to the system and control panel. Each module includes 8 pieces of 4-20mA channels. The addressable entrance module connects to the gas control panel by loop. Product Family Code Description... - Page 3 PHYSICAL 20M Cable sleeve connection 25M Cable sleeve connection Mounting place...
-
Page 4: Technical Specifications
TECHNICAL SPECIFICATIONS Model EGIM Environment class II Indoor Environment Electrical Nominal voltage 24V DC Supply voltage range 21-27V Standby current 400uA Alarm current 400uA Short circuit insulator Available Entrance number 8 connections Entrance type 4-20mA General Body Body type Standard Color Grey Protection class... - Page 5 The first 2 digits of the serial number on the product indicate the production date (The number on the label of the product). Producer EDS Elektronik Destek Sanayi ve Ticaret Ltd. Meclis Mah. Teraziler Cad. Hayran Sk. No: 4 34785 Sancaktepe / İstanbul / Turkey...
-
Page 6: Main Board
CONNECTION Mainboard Loop connection and external supply entrance Calibration and addressable connection 4-20mA entrances and supply exit Figure 1: 4-20mA Detector Mainboard... -
Page 7: Panel Connection
Panel Connection Detector is connected to the panel as shown in Figure 2. Soil Connection SIGN SIGN SIGN G.IN SIGN G.IN G.OUT G.OUT Figure 2: Detector panel connection. LOOP LOOP... -
Page 8: Detector Connection
Detector Connection Labels and cable functions should be stated in the cablings made. A proper cabling should be supplied for electrical terminals. For 4-20mA output detector connection in Vcc (collector supply voltage) supply from the place indicated with V+ as shown in Figure 3, and as for the place indicated with GND (ground), by making ground connection, you can make the entrance connection from the entrances between IN 0-8. -
Page 9: Cable Properties
Connection up to 8 detectors Figure 4: The connection of multi-detectors to EGIM module. Cable Properties The cable to be connected between detector and panel should have 1.5mm horizontal cutting at minimum and absolutely include ground cable. For each loop, maximum cable length should be 1000m. Recommended cable: LIYCS 3X1.5 insulated cable (cord). -
Page 10: Wall-Mounted
MOUNTING In this part, the detector mounting is told. Please do not start the mounting operation before understanding the system, parts and the working principle of the system. You are recommended to start mounting after reading the warning and the points to take into consideration. WARNING Anti-static measures should be taken before touching electronic materials. - Page 11 Wall-Mounted Place Cover Screws 20M Cable Sleeve 25M Cable Sleeve Figure 5 : Detector Mounting FIRST OPENING Make the detector connections of 4-20mA entrance module. Power-up the module. Start automatic learning module from the control panel and introduce the device to the system. You can see the data over the control panel.
-
Page 12: Error Recovery Procedures
In case of a problem, turn off the power and contact to the service. EGIM-UM-2239-R2 Technical specifications are subject to change without prior notice. EDS Elektronik Destek San. Ve Tic. Ltd. Şti. Meclis Mah. Teraziler Cad. Hayran Sok. No:4 34785 Scan this code with your Sancaktepe / İstanbul / Turkey +90 216 528 45 00...
Need help?
Do you have a question about the NEPTUNE EGIM and is the answer not in the manual?
Questions and answers