Maintenance; Fcc Statement - HoMedics NMS-685HJ Instruction Manual And Warranty Information

INSTRUCTIONS FOR USE
1. Your unit should arrive with a full charge. To turn the unit on, hold the power p button
down until the unit lights up. Pressing the power button will automatically turn on the heat
function and the auto program.
NOTE: Use the removable straps to adjust the massager comfortably onto your neck (Fig. 1),
or remove the straps and use as a full-body massager on targeted areas (Fig. 2).
2. The auto program alternates between high and low intensity and also reverses the direction
of the massage throughout the program. To end auto program and switch to a single intensity,
press the "H" button for high intensity or the "L" button for low intensity.
Fig. 1 Fig. 2
3. To turn the heat function off, press the heat h button once.
4. To turn the unit off, hold the power p button down until all the functions turn off.
NOTE: This massager comes with a USB cord. To charge your massager, plug one side of the
USB-C cord into the unit and plug the other end into an adapter. Next, plug the adapter into
a 120-volt outlet.
4

MAINTENANCE

TO CLEAN
Unplug the unit and allow it to cool before cleaning. Spot clean only with a soft, slightly damp
sponge. Never allow water or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• NEVER use abrasive cleaners, brushes, or strong chemicals that may or may not be
flammable and/or damaging to the product to clean.
• DO NOT attempt to repair the massager. There are no user-serviceable parts. For service,
contact Consumer Relations at the telephone number listed in the Warranty section.
TO STORE
Place massager in its box or in a cool, dry place. Avoid contact with sharp edges or pointed
objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the
power cord around the unit. Do not hang the unit by the power cord.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
NOTE: HoMedics is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate
the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3 (B). These limits
are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
5