Things To Check Before You Call For Service - Culligan Aquasential Tankless RO Owner's Manual

Things to Check Before You Call For Service

• If using the wall power supply, confirm the correct power supply is being used�
• Check all extension cable connections if applicable�
• Check connection at the back of the system�
• Make sure you have cold water going to the unit
No Product Water
Check the water supply to the RO to make sure that it is turned on� Make sure the AC adapter is plugged in and not damaged�
Not Making Enough Water
If the flow rate out of your system has significantly decreased, it may be time to replace your filters and membrane�
Constant Running to Drain
The system should run a small amount of water to the drain while producing your filtered water and during periodic flushing�
If the system is constantly running to drain, call your Culligan dealer to check the system and correct the continual running�
Water Leak
Any time you find water around the unit or hear the leak alarm, immediately shut-off the water supply and contact your local dealer�
Water Doesn't Taste Good
If the taste of the water has changed, turn on the faucet and let it run for 15 minutes� If the taste continues, call your local dealer�
11
01044539 A 12/22