Care And Cleaning - Hamilton Beach 76382 Manual

Care and Cleaning

1. Unplug.
2. To remove Piercing Lever
Assembly: Push and hold
Release/Insert Button. Grasp
Magnetic Lid Holder and pull
Assembly out.
3. Wash Piercing Lever Assembly,
Small and Large Jar Openers,
and Multi-Tool™ in hot,
soapy water. Rinse and dry
thoroughly.
8
w WARNING
immerse the can opener body or cord in water or
other liquid.
4. Wipe Base of Can Opener with a damp cloth. Never immerse Can
Opener in water. Do not use abrasive cleaners or pads to wipe
the base of the Can Opener.
5. To insert Piercing Lever Assembly (see page 5): With one hand,
push and hold Release Button; with the other hand, slide Piercing
Lever Assembly with Handle straight up into Piercing Lever
Assembly opening. Release Button and push Assembly into
Piercing Lever Assembly opening. Turn right until it is in place.
6. Ensure Lever is fully inserted into Can Opener.
Electrical Shock Hazard. Do not