Hamilton Beach 76382 Manual page 5

How to Install Piercing Lever Assembly
1. To insert Piercing Lever
Assembly, match Alignment
Arrows.
2. Push and hold Release
Button and insert Piercing
Lever Assembly with Handle
straight up into Piercing Lever
Assembly opening.
3. Once fully inserted, release
lever. Turn right until Piercing
Lever Assembly is in place.
NOTE: If Can Opener does not
operate properly, the arrows on
the Piercing Lever Assembly
were not aligned before inserting.
Remove Piercing Lever Assembly
and repeat steps 1-3.
5