Supplied Parts - BONTEC TC-003WH Instruction Manual

Assembly Instructions for TV Trolley Stand
Thanks forchoosing our stand. This stand was designed for mounting flat panel televisions weighing up to 25kg.The
height of TV can be easily adjusted. The integrated wheels provide ease of movement.
If you do not understand these directions, or have any doubts about the safety of the installation.
Safety Warning:
please call a qualified contractor. Check carefully to make sure there are no missing or defective parts. never use
defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose
that is not explicitly specified in this manual. We can not be liable for damage or injury caused by incorrect mounting,
incorrect assembly, or incorrect use.
Required Tools: Phillips screw driver.

Supplied Parts

No.
1
2
3
4
5
6
7
8
Picture Description
Long Square Tube
Short Square Tube
Tube Connector
Tube Connector Cover
Top Pole With One Hole
Middle Pole With Three Holes
Bottom Pole With Four Holes
Pole Connector
1
Quantity
2
2
1
1
1
1
1
4