Pin2 Code; Puk Code; Puk2 Code; Security Code - LG G7200 User Manual

Getting started
PIN2 code (4 to 8 digits)
The PIN2 code, supplied with some SIM cards, is required to access
functions such as Advice of Call Charge
These functions are only available if supported by your SIM card.
Check with your network for further information.
PUK code (4 to 8 digits)
The PUK (PIN Unblocking Key) code is required to change a blocked
PIN code. The PUK code may be supplied with the SIM card. If not,
contact your network operator for the code. If you lose the code, also
contact your network operator.
PUK2 code (4 to 8 digits)
The PUK2 code, supplied with some SIM cards, is required to change
a blocked PIN2 code. If you lose the code, also contact your network
operator.
Security code (4 to 8 digits)
The security code protects the unauthorised use of your phone. The
default security code is set to '0000' and the security code is required
to delete all phone entries and to activate the
Also, the security code is required to enable or disable the phone lock
function to prevent unauthorised use of the phone. The security code
default setting can be modified from the

Barring password

The barring password is required when you use the
function. You obtain the password from your network operator when
you subscribe to this function. See page 90 for further details.
G7200 User Guide
and Fixed dial number.
Reset settings menu.
Security settings menu.
Call barring
24

General functions

Making and answering calls

Making a call

1. Make sure your phone is switched on.
2. Enter a phone number, including the area code. To edit a number
on the LCD screen, press the right/left navigation keys to move the
cursor to the desired position or simply press the clear key (
erase one digit at a time.
]
Press and hold the clear key (
3. Press the send key ( ) to call the number.
4. To end the call, press the end key (
can also end the call by closing the folder.

Making a call using the send key

1. In standby mode, press the send key (
incoming, outgoing and missed phone numbers will be displayed.
2. Select the desired number by using the up/down navigation key.
3. Press .

Making an international call

1. Press and hold the key for the international prefix. The '+'
character automatically selects the international access code.
2. Enter the country code, area code, and the phone number.
3. Press .

Ending a call

When you have finished your call, press the end (
G7200 User Guide
) to
) to erase the entire number.
) or the right soft key. You
), and the latest
) key.
25